What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 00:09

The third is lightning and “how it gets conducted into a home.”
This one hit behind the barn.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What are your thoughts on the dating app "scam"?
The bolt then partially travels down the line to your home.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What are the easiest stores for shoplifting?
It seems Mohan does not understand the difference between a comment and an Answer.
This device then solves the entire problem.
Barnstars:
But… the neutral is now “floating” because of the 1 ohm resistance.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–10[John johnson John Johnson ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
The Best Dinner to Help You Poop in the A.M., According to a Dietitian - EatingWell
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
What is lightning?
These are simplified answers to the original question, and does not change anything I wrote above.
The Fog of Trade War Is Causing Confusion About Price Increases - WSJ
Because the load is inductive, the current lags the voltage.(by a bit).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
It also is a device that limits the change in current flow.
Why do narcissists and especially covert narcissists always play the victim?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(Dc diagram shown, AC is similar).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
How can you maintain self-control?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is where this question deviates from being a 'generic' question, and becomes more specific.
There are two important concepts here.
Why did my ex-narcissist move so fast with his new supply marriage engagement moving in, etc.?
[old diagram got deleted by accident]
Edit 2024–10.
What does a fuse do?
What do you think, TikTok is nothing but another porn site? Do you agree or not? Why?
The MOV will conduct when the voltage exceeds 50% of line voltage.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What are some reasons why men may not want to date a woman who can pay her own bills?
One is “what exactly is in a ‘surge protector’ ? ”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then asserts :
but I think this circuit , shows a few more pieces.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
[image of Common-mode choke]
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
For this case there are devices called Metal oxide varistors (MOV).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At least they know the answer if they wanted it.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
An AC voltage/ current source, and an ac inductive load.
In schematic diagrams this is the symbol for a fuse:
This is 'the assistant's answer'
So, the voltage could go up to 500 volts, and the fuse will not open up.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
eight
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The other is “what does a “fuse” do?”
At one ohm, the resistor has a maximum of 1 watt power.
One
He then describes Rainy Season and Lightning.
A circuit breaker is similar, but is resettable.
He then describes the function of a fuse.
but this device (an Inductor) … impedes the rapid changes in the current.
nine
First Sentence:
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is where the MOV conducts again, and dissipated the energy.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
a photo is worth a thousand words.
These devices are installed between the “hot” and “neutral” and protective ground.
the problem then depends on "how fast does the fuse operate?".
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
A fuse is a non-resetable over current circuit protector.
But it can get overloaded, and no longer works.
Here is a simplified AC power diagram.
so, what happens?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Now when you have a certain ac resistance, then a current flows in a loop.
I post the exact comment here.
2024–10–16 [ OO OLAOYE OYEBODE ]
Upvotes:
what exactly is a ‘surge’ protector?